Input Source Selection (Component, Scart, Hdmi) - Eiki LC-WB200W Owner's Manual

Input Source Selection (Component, Scart, HDMI)
Direct Operation
Choose Computer 1(Component) or Computer 1 RGB (Scart) by pressing the COMPONENT or
the COMPUTER 1 button on the remote control. Choose HDMI by pressing the HDMI button on the
remote control or you can press the INPUT button on the top control to choose the desired input
source.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
Remote control
Menu Operation
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Input and then press the Point ►
button or the SELECT button.
2
Use the Point ▲▼ buttons to select
Computer 1 and then press the Point ►
button.
3
Use the Point ▲▼ buttons to select
Component or RGB(Scart) and then press
the SELECT button.
When the input source is coming
Component
from video equipment connected
to the COMPUTER IN 1/
COMPONENT IN terminal with a
COMPONENT-VGA Cable, select
Component.
When the input source is coming
RGB (Scart)
from video equipment connected
to the COMPUTER IN 1/
COMPONENT IN terminal with
a Scart-VGA Cable, select RGB
(Scart).
When video input signal is
HDMI
connected to the HDMI jack,
select HDMI.
Note:
When the Input search function is set to On 1 or On
2, the input signal will be searched automatically
(p.45).
COMPUTER 1 button
Computer 1 (RGB)
Computer 1 (Scart)
HDMI button
COMPONENT button
Computer 1 (Component)
Top Control
Input Menu
Press the Point ▲▼ buttons
to select Component or
RGB (Scart).
Video Input
INPUT button
37