Connecting To A Computer - Eiki LC-WB200W Owner's Manual

Installation
Cables used for connection
• VGA Cables (Mini D-sub 15 pin) *
• Audio Cable
• HDMI-DVI cable
(*One cable is supplied; other cables are not supplied with the projector.)
External Audio Equipment
Audio Input
This terminal
is switchable.
Set up the
terminal as
Audio cable
either Computer
input or Monitor
(stereo)
output.
(See Page 49.)
AUDIO OUT
(stereo)
 Note:
• When the MIC function is set to Off in the Sound menu, the MIC function is disabled. (p. 24)
• When MIC is set to On in Sound Menu, COMPUTER AUDIO IN 1, COMPUTER AUDIO IN 2 / MIC IN and AUDIO
IN(L/R) terminals can be connected at the same time. At this time, COMPUTER AUDIO IN 2 terminal as MIC
input. (p. 24)
• Input sound to the COMPUTER AUDIO IN 1, COMPUTER AUDIO IN 2 / MIC IN terminals when using the
COMPUTER IN 2 / MONITOR OUT and the COMPUTER IN 1/ COMPONENT IN terminal as input.
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 / COMPONENT IN and not
the COMPUTER IN 2/ MONITOR OUT.
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting
cables.
14

Connecting to a Computer

Monitor Input
Monitor Output
VGA VGA
cable cable
COMPUTER
MONITOR
COMPUTER
IN 1 /
OUT
IN 2
COMPONENT IN
Monitor Output
Audio Output
HDMI-
VGA
DVI
cable
cable
HDMI
COMPUTER 1/
COMPUTER 2
AUDIO IN (PC or MIC)
Audio cable
(stereo)