Input Source Selection (Component, Rgb Scart 21-Pin) - Eiki LC-XB43N Owner's Manual

Video Input
Input Source Selection (Component, RGB Scart 1-pin)
Direct Operation
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or
press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
COMPUTER button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point
▲▼
then press the Point
3
Use the Point
▲▼
RGB(Scart) and then press the SELECT button.
When the input source is coming from video
Component
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
Note:
• Network is for the Network function. See the owner's
manual of "Network Set-up and Operation" .
• When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.49).
4
Computer1 ((RGB) /
(Component) / (Scart))
Computer (RGB(PC digital) /
RGB(AV HDCP) / RGB(Analog))
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1 and
button.
►
buttons to select Component or
Computer1 ((RGB) /
Top Control
(Component) / (Scart))
digital) / RGB(AV HDCP) /
INPUT button
Input Menu
Computer (RGB(PC
RGB(Analog))
Video
S-video
Network
VGA