Table of Contents
Advertisement
Video Input
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
Choose Computer 2 by pressing the COMPUTER 2 button
on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point
frame pointer to the Input Menu icon.
2
Press the Point
pointer to Computer 2 and then press the SELECT
button.
3
After the Source Select Menu appeared for Computer
2, move the pointer to Component or RGB(Scart) and
then press the SELECT button.
When the input source is coming from video
Component
equipment connected to the COMPUTER IN
2 / COMPONENT IN terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER IN
2 / COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
✔
Note:
•When the Input Search function is set to "On1" or "On2", the
input signal will be searched automatically (p.45).
36
buttons to move the red
7 8
ed
buttons to move the red arrow
Top Control
COMPUTER 2 button
REMOTE CONTROL
COMPUTER button
Input Menu icon
Input Menu
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
Computer
2
Source Select Menu
Move the pointer to
Component or RGB(Scart)
and press the SELECT
button.
Computer 1
Computer 2
Advertisement
Table of Contents
