Table of Contents
Advertisement
User's Guide
Scanning Using the Settings Registered on the Computer
(Document Capture Pro)
You can register a series of operations as a job using Document Capture Pro. Registered jobs can be performed
from the printer's control panel.
If you create the job to save the scanned image to the computer, you can perform the job from the printer and save
the scanned image to the computer.
Set the operation mode on the control panel before scanning.
Note:
Operations may vary depending on the operating system and the software version. See the software help for details on using
the features.
Related Information
"Application for Configuring Scanning from the Computer (Document Capture Pro)" on page 190
&
Setting a Job
Set the job on the computer using Document Capture Pro.
Note:
Operations may vary depending on the operating system and the software version. See the software help for details on using
the features.
Creating and Registering a Job (Windows)
Note:
Operations may vary depending on the operating system and the software version. See the software help for details on using
the features.
1. Start Document Capture Pro.
2. Click Job Settings on the top screen.
The Job List is displayed.
3. Click New Job.
The Job Settings screen is displayed.
4. Make job settings on the Job Settings screen.
❏ Job Name: Enter the name of the job you want to register.
❏ Scan Settings: Make scan settings such as the size of the originals or the resolution.
❏ Save Settings: Set the saving destination, the saving format, the naming rules of the files, and so on.
❏ Destination Settings: Select the destination of the scanned images.
5. Click OK to return to the Job List screen.
The created job is registered in the Job List.
6. Click OK to return to the top screen.
Scanning
112
Advertisement
Table of Contents
