Several Sheets Of Paper Are Fed At A Time; Paper Does Not Feed From The Optional Paper Cassette Units; Paper Does Not Feed Correctly After Replacing The Maintenance Rollers; Paper Out Error Occurs - Epson Workforce Pro WF-C8610 Series User Manual

Table of Contents

Advertisement

User's Guide
"Loading Paper in the Rear Paper Feed" on page 33
&

Several Sheets of Paper are Fed at a Time

When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is loaded
in the printer before you reload the paper.

Paper Does Not Feed from the Optional Paper Cassette Units

If you have added optional paper cassette units, you need to make settings in the printer driver.
Related Information
"Setting the Optional Paper Cassette Unit in the Printer Driver - Windows" on page 245
&
"Setting the Optional Paper Cassette Unit in the Printer Driver - Mac OS" on page 246
&
Paper Does Not Feed Correctly After Replacing the Maintenance
Rollers
The maintenance rollers may not have been replaced correctly. Check if they have been installed correctly.

Paper Out Error Occurs

When a paper out error occurs although paper is loaded in the rear paper feed, reload paper in the center of the
rear paper feed.

Original Does Not Feed in the ADF

❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
Solving Problems
198

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workforce pro wf-c8610Workforce pro wf-c8610dwfC11cg69401

Table of Contents