General Safety Requirements - multicomp pro MP700506 User Manual

1. General Safety Requirements

Before use, please read the following safety precautions to
avoid any possible bodily injury and to prevent this product or
any other connected products from damage. To avoid any
contingent danger, ensure this product is only used within the
ranges specified.
Use Correct Power Cord. Use only the power cord supplied

with the product and certified to use in your country.
Power Grounded. The main plug should be inserted in a

power socket outlet only if provided with a protective earth
contact.
Check all Terminal Ratings. To avoid fire or shock hazard,

check all ratings and markings on this product. Refer to the
user manual for more information about ratings before
connecting to the instrument.
Use Proper Overvoltage Protection. Make sure that no

overvoltage (such as that caused by a thunderstorm) can
reach the product, or else the operator might expose to danger
of electrical shock.
Do not operate without covers. Do not operate the

instrument with covers or panels removed.
Avoid exposed circuit. Be careful when working on exposed

circuitry to avoid risk of electric shock or other injury.
Do not operate if any damage. If you suspect damage to the

instrument, have it inspected by qualified service personnel
before further use. Any maintenance, adjustment or
replacement especially to circuits or accessories must be
performed by qualified service personnel.
Use your instrument in a well-ventilated area. Make sure

the instrument installed with proper ventilation.
Do not operate in damp conditions. In order to avoid short

circuiting to the interior of the device or electric shock, please
1