Gfp 663TH Operation Manual page 33

Gfp 663TH April 2021
20. Rewind Assembly
The unit comes with two rewinds: one upper and one lower rear rewind.
1. The rewind shaft described in Sect 17 above, is a drop-in shaft and is used to take up the
release liner of the overlaminate.
2. The lower rear rewind, seen below, is a swingout shaft and is used to rewind the web for
roll-to-roll applications. This rewind also contains two side slitters for trimming the sides of
the web. Extra side slitters can be added for multiple side slitting.
Locking Cradle
Locking Thumbscrew
Rotating Blade Pressure Adjustment Thumbscrew
Left Slitter Head
Nylon Guide Bar
Right Slitter Head
33