Table of Contents
Advertisement
(4) Door Latch
Door latch is additionally equipped to advance the air tightness of the inner chamber. Close the
door and turn door latch to the right.
(5) Control Panel
Main control part. Improved immediacy and convenience by touch LCD.
User can set-up temperature and shaking control with this controller.
This controller includes Start/ Stop button and LED ON/OFF button.
(6) Filter
Clip-on type to avoid any dust in Condenser.
(7) Door Handle
To open/close the door.
(8) Transparent Viewing Window
User can monitor the inner samples without opening the door during operation.
(9) Gas Spring
To offer convenience for user during sample change, gas spring is fixed to open door.
(10) Door Packing
To absorb the shock when users open/ close door and to seal door to the chamber inside.
(11) Power Switch
To ON/OFF Unit main power.
(12) Temperature Limiter
Temperature limiter is independently configured from the main controller. The inner temperature of
the chamber exceeds more than the set temperature, the device cut off the power to the power
switch for the secure condition. (Refer to '4.5 Safety Device')
(13) Computer Interface
This unit can connect to PC by USB port and RS232 port.
If it is connected, PC can monitor the unit operation status and start the unit
operation.
USB is connected preferentially if USB and RS232 are connected at the
same time.
８
Advertisement
Table of Contents
