Table of Contents
Advertisement
3.4 Installation
3.4.1 Caution for Installation
(1) The device is recommended to use under the room temperature and humidity (30°C, 80%RH)
do not install it near the Heat devices like a Heater.
(2) Have enough space for door opening. (refer to 3.3.1)
(3) Please install it on the sturdy surface laboratory and do not throw down or gives a big shock.
(4) Locate it 1.5m away from any light devices and 30 CM away from the wall.
(5) Install it on the sturdy leveled surface to prevent abnormal turbulence and noise.
１４
Advertisement
Table of Contents
