Shaking Timer - Jeio tech ISF-7100 Operating Manual


Move out from the setting mode with ESC button.

In the case of no touch for 10 seconds, the display changed to the main automatically.

Check the PV, RPM on the setting display is available. (right upper side)

The operating is maintained as previous during the setting.

Once the door is opened during the shaking operating, the heater and fan is stopped. Close the
door before door error generating, the previous operating is back.

In the case of change the sample, stop the shaking and check whether the platform is completely
stopped.

4.2.3 Shaking Timer

Timer is only available for shaking. Once the timer is set, the shaking stops after operating the set time
and beep is generated. Setting time is on the display once the timer is set and '---:--' is on the display once
the timer is not set. Remaining time is on the display once the timer is set and accumulated time is on the
display once the timer is not set.
(1) Timer ON
Touch the Set timer on the main display. Timer OFF is on the display once the timer is set and Timer
on is on the display once the timer is not set. Touch the Timer ON button and set the time on the display.
Touch the Enter button. Check the set time on the main display.
(2) Timer OFF
Touch the Set timer on the main display. Timer OFF is on the display once the timer is set and Timer
on is on the display once the timer is not set. Touch the Timer OFF button and touch the Enter. Time
display on the main display is changed to "---:--".
(3) Change the setting time
Touch the Set timer on the main display. On the Timer ON status, put the time on the display. Touch the
Enter. Check the changed time on the main display.
２３