Table of Contents
Advertisement
3.4.2 Adjusting the Horizontality
(1) Put the unit the desired place.
(2) Using the spanner, adjust the height of caster. Turn the ① nuts to the right, the height is
increased. The caster must be lifted up at least 5mm from the bottom.
(3) Put the level on the top of the unit and check the horizontality. Adjusting the caster.
(4) For fixing the status, turn the ② nuts to the upside of the unit.
(5) In the case of move the unit, follow the procedure in reverse.
②
①
•
Do not palce the unit on the tilted ground or not flat place.
•
Once the foot is not fixed and the unit is operated, the unit and the sample could be in
trouble.
１５
Advertisement
Table of Contents
