Table of Contents
Advertisement
2.2.2 Advanced Convenience
(1) User friendly interface according to Touch LCD.
Eidetic unit operation check and easy to control.
(2) Timer and operation time check of shaking performance is available. Setting and checking the
value is available up to 999 hours and 59 minutes.
(3) Large window with LED lamp on the door offers the convenience to monitor the samples in the
chamber without opening the door in the dark place.
(4) Easy connection from Unit to PC with RS232 Port and USB port and it allows easy monitoring
and control.
(5) By providing an automatic power failure recovery, even if the product gets power back after a
momentary power failure, the auto run function automatically runs the product.
(6) Adjustable caster for convenient relocation and installation.
(7) In case of the liquid leakage caused by spilled reagent or cracked flask inside of the chamber,
the liquid is designed to be drained out through the drain of the chamber bottom which is
connected to the port on the product's side.
(8) This equipment is more convenient when mounting / desorption of the sample. When shaking
performance, operation always starts and stops at a specified location, the platform is fixed to
easily replace the sample. Also, when you open the door, the height of the chamber is similar to
the general sink, a shorter experimenter can also easily exchange samples.
2.2.3 Advanced Safety
(1) Smooth shaking start and stop mechanism minimizes the opportunity of reagent leakage.
(2) Unit can control possible RPM speed when the shaking that unit cannot control due to (overload
& high RPM, weight imbalance) is operated. There is no movement due to shaking vibration.
(3) There is an independent adjustable temperature limit device in addition to the main controller in
this device. If temperature rises more than the specified value due to equipment error, the
independent device protects the internal sample and equipment by blocking the power supply of
the temperature-related equipment.
(4) When shaking operation is not possible due to the obstacle interfering the system, over current
protection device stops the operation.
６
Advertisement
Table of Contents
