Table of Contents
Advertisement
4.2 How to use the controller
Setting is available on the main display.
1
Set RPM
2
Set Temperature
3
Set Timer
4
Actual Temperature
5
Actual RPM
6
Back
7
Power Ack
Display the setting RPM. Touch the screen, set the RPM.
Display the setting temperature. Touch the screen, set the temperature.
Display the shaking time. Touch the screen, set the timer. In the case of
no timer is set, the operating time is displayed.
(999hours 59minutes)
Display the temperature of inside of chamber.
Display the present shaking speed.
From main display to home display. It is available when the unit is stop
the operating.
In the case of the power is off for the supply faulty reason and the supply
is back, the previous operating is back. It is auto restart function. At the
time Power-Ack button is appeared on the display. In the case of the
shaking was operating, the operating time is appeared on the display
with red words. Once touch the Power-Ack or change the setting value,
The Power Ack display is disappeared..
２０
Advertisement
Table of Contents
