③ In case of overloading, control the sample weight according to 9.1(Max
④ Check door switch if shaking is not operated after shaking start button
⑤ Check Timer close status if shaking is not operated after shaking start
⑥ If the problem is not fixed with the above method, please request A/S.
① Check fixed condition of platform or sample.
② Check the weight of sample is shifted to one side, relocate the samples
Noise
③ If the problem is not fixed with the above method, please request A/S.
speed is slow down, check the sample location and relocate the
samples harmoniously
load per speed).
press.
button press, cancel timer set-up.
evenly.
40