Keys That Begin With The Letter R - HP 8924E User Manual

Keys That Begin with the Letter R

RECALL
REF SET
RELEASE
RECALL is used to recall instrument setups saved in SAVE/RECALL registers.
Programming RECALL
The HP-IB commands :REGister:RECall are used to select this function
programmatically. The SAVE/RECALL mass storage device is selected using the
field on the I/O CONFIGURE screen.
SAVE/RECALL
See Also
"Saving and Recalling Instrument Setups" on page 54
Press and release the SHIFT key, then the INCR
set function. This function is used to enter or remove a measurement reference for
relative AF and RF measurements.
This key is used to delete the assignment of the User Keys, K1 through K5, and
K1' through K3'. Press and release the SHIFT key, then the K5 key to select the
RELEASE function.
See Also
"Using USER Keys" on page 59
Chapter 4, Description of Keys
Keys That Begin with the Letter R
÷
10 key to access the reference
79