Table of Contents
Advertisement
Chapter 7, Description of Fields
Fields That Begin with the Letter P
Pwr Up Reg
240
This field determines if, at power-up, the mobile station will attempt to register
with the Test Set.
•
On - the mobile station will perform a power-up registration
•
Off - the mobile station will not perform a power-up
registration
Operating Considerations
This field provides the option of performing a zone-based registration when a
mobile station finds service (
waiting for the power-up registration.
This field should be set to the desired mode before a mobile station finds CDMA
service.
When this field is "On" the Test Set instructs the mobile station to attempt a
registration upon power-up. This instruction is sent as part of the paging channel
overhead message System Parameters, and is received by the mobile station soon
after the mobile station finds service.
See Also
"Setting up a Call"
chapter in the HP 8924E Introduction to Operation
Screen(s) Where Field is Present
CDMA CELL SITE CONFIGURATION
Register field description, on page 243
) instead of
Advertisement
Table of Contents
