Using Memory Cards - HP 8924E User Manual

Chapter 8, Memory Cards/Mass Storage

Using Memory Cards

Using Memory Cards
Inserting and Removing Memory Cards
286
OTP (One Time Programmable) cards provide removable read-only storage. File
editing and erasure are not possible. These cards cannot be programmed by the
Test Set; they require a special memory card programmer to save files.
SRAM cards provide removable read/write memory for your files, similar to a
flexible disk. Data can be stored, re-stored, read, or erased as needed.
SRAM memory cards require a battery to maintain stored information.
Table 9
Memory
64 kilobytes
1 Mbyte
illustrates how to insert a memory card into the Test Set's front panel.
Figure 30
To remove a memory card, simply pull it out.
Memory cards may be inserted and removed with the Test Set powered on or off.
Memory Card Part Numbers
Type Part Number
SRAM HP 83230A
SRAM HP 83231A