Table of Contents
Advertisement
Chapter 7, Description of Fields
Fields That Begin with the Letter E
ESN (hex):
ESN
190
This field displays the electronic serial number (ESN), in hexadecimal form,
received from the mobile station on the reverse control channel in response to a
forward control channel message. The
the
field is set to
Display
containing this information has been decoded.
Refer to the
"Display" field on page 178
measurement results from this field.
Screen(s) Where Field is Present
CALL CONTROL
This field is used to enter the electronic serial number (ESN) of the mobile station
into the Test Set. There are two methods which can be used to enter the
serial number can be captured by the Test Set through a registration order, or the
serial number can be entered as an 8-digit hexadecimal value directly into this
field.
To capture the electronic serial number through a registration , see
field description, on page 242
To enter the serial number directly use the :ESNumber command.
The query form of the command (that is, :ESNumber?) can be used to determine
the current setting of the ESN field.
Screen(s) Where Field is Present
AUTHENTICATION
ESN (hex):
and a reverse control channel message
Data
for information on how to read
for further information.
field is displayed only when
ESN
Register
. The
Advertisement
Table of Contents
