Table of Contents
Advertisement
Chapter 7, Description of Fields
Fields That Begin with the Letter D
Disarm
This field stops a measurement in progress. It is only displayed when the
Meas
field is set to
. This field is not updated to show the Meas Cntl mode
Cntl
Single
when the Test Set is operated remotely.
Operating Considerations
The 'DISARM' command does not prevent subsequent measurements from being
triggered when the Test Set is in REPetitive triggering mode.
If
is selected with no measurement in progress, it will have no effect on
Disarm
the display.
Screen(s) Where Field is Present
CDMA CELLULAR MOBILE RECEIVER TEST
CDMA CELLULAR MOBILE TRANSMITTER TEST
177
Advertisement
Table of Contents
