Connectors That Begin With The Letter P - HP 8924E User Manual

Connectors That Begin with the Letter P

PARALLEL PORT
This port is used with printers requiring a parallel interface when printing screen
images or test results. Set the
CONFIGURE screen or TESTS (Printer Setup) screen) to
this port. Use address 15 when sending data to this port from IBASIC programs.
Pin numbers are embossed on the connector.
1. nStrobe
2. Data 1 (Least Significant Bit)
3. Data 2
4. Data 3
5. Data 4
6. Data 5
7. Data 6
8. Data 7
9. Data 8 (Most Significant Bit)
10. nAck
11. Busy
12. PError
13. Select
14. nAutoFd
15. nFault
16. nInit
17. nSelectIn
18. Signal Ground (nStrobe)
19. Signal Ground (Data 1 and Data 2)
20. Signal Ground (Data 3 and Data 4)
21. Signal Ground (Data 5 and Data 6)
22. Signal Ground (Data 7 and Data 8)
23. Signal Ground (Busy and nFault)
24. Signal Ground (PError, Select, and nAck)
25. Signal Ground (nAutoFd, nSelectIn, and nInit)
Operating Considerations
• 25-pin Centronics
Chapter 5, Description of Connectors
Connectors That Begin with the Letter P
field (on the PRINT
Printer Port:
to print to
Parallel
101