Fields That Begin With The Letter T - HP 8924E User Manual

Chapter 7, Description of Fields

Fields That Begin with the Letter T

Fields That Begin with the Letter T
Test Status
268
The labels under
Test Status
annunciators indicate that an event took place or that a condition exists. All status
annunciators can be queried over HP-IB.
"Connected (annunciator)" field on page 268
"Svc Opt 2/9 (annunciator)" field on page 268
"Testing (annunciator)" field on page 268
"Passed (annunciator)" field on page 269
"Failed (annunciator)" field on page 269
"Max Frames (annunciator)" field on page 269
Connected (annunciator)
This annunciator indicates that the Test Set and a mobile station have completed
the signaling steps required to establish a CDMA call, and the Test Set has not had
any indication that the call has ended or should end.
For a call to the mobile station (initiated by the Test Set), the mobile station
•
must ring and then be answered before this annunciator will light. When using
Service Option 2, the mobile station will automatically answer a call and go to
the Connected state.
For a call to the Test Set (initiated by the mobile station), the Test Set will
•
automatically answer the call (if the
Connected annunciator will light. If the
message will appear prompting you to press the ANS key.
When a call is terminated, this annunciator will go out.
This field is duplicated on the CDMA CALL CONTROL screen.
Svc Opt 2/9 (annunciator)
This annunciator is lit when the Test Set is on a service option 2 (mobile station
data loopback) call.
See Also
Traffic Data Mode field description, on page 273
Testing (annunciator)
This annunciator is lit when a FER test is in progress
are highlighted by annunciators. When lit, these
field is set to Auto), and the
Answer Mode
Answer Mode
field is set to Manual, a