Document Information - ABB HiPerGuard MV UPS User Manual

4 H I P E R G U A R D M V U P S U S E R M A N U A L
—

Document information

Handling and Installation
Handling
The personnel must be skilled and experienced in unpacking and transporting heavy equipment.
Mechanical installation
The personnel must be qualified to prepare the installation site according to the site and equipment requirements
and to perform the installation accordingly.
—
Commissioning of the HiPerGuard must only be performed by qualified
and certified ABB personnel
Electrical installation
The personnel must have a sound knowledge of the relevant electrical codes and specifications covering low and
medium voltage equipment, be experienced with electrical wiring principles, and know the electrical symbols typ-
ically used in wiring diagrams.
Operation
The personnel include all persons who operate the HiPerGuard from the GDM. Those people must know the func-
tions of the Graphic Display Module (GDM), be adequately trained for the MV UPS, and understand its operation
process
Maintenance
The personnel include all persons who:
• are qualified to carry out preventive and corrective maintenance on MV UPS as described in this manual.
• are thoroughly familiar with the product.
• have a sound knowledge of the relevant electrical codes and specifications covering low and medium voltage
equipment.
• are able to assess the hazards as-sociated with the energy sources of the MV UPS system and act correspond
ingly.
• know the safe shutdown and grounding procedures for the MV UPS system.
• are familiar and understand the instructions contained in the Service manual (see related documentation).
Responsibilities of the user
It is the responsibility of those in charge of the HiPerGuard MV UPS to ensure that each person involved in the in-
stallation, operation or maintenance of the product has received the appropriate training and has thoroughly read
and clearly understood the instructions in this manual and the relevant safety instructions.
Intended use of equipment
Those in charge of the HiPerGuard MV UPS must ensure that the product is only used as specified in the contrac-
tual documents, operated under the conditions stipulated in the technical specifications and on the rating plate
of the product, and serviced in the intervals as specified by ABB.
Use of the HiPerGuard MV UPS outside the scope of the specifications is not permitted and can lead to malfunc-
tion or hazardous situtations. Intended equipment use also implies that only spare parts recommended and ap-
proved by ABB may be used. Unauthorized modifications and constructional changes of the HiPerGuard MV UPS
can cause malfunction and result in hazardous situations. Therefore, such modifications are not permitted.