Table of Contents
Advertisement
Use an A-B type USB (Universal Serial Bus) cable be-
tween the ID-RP4000V and your PC. USB driver in-
stallation is required.
In addition, individual USB driver installations are re-
quired for each connector, because the communica-
tion port numbers are different.
The instructions that follow describe the installation
of the ID-RP4000V [SERVICE T] connector as an ex-
ample.
Microsoft
®
Windows
■
Start Windows.
q
• Quit all other applications if any are running.
• When installing the driver, log in as the administrator.
Insert the CD that is supplied with the ID-RP4000V
w
(Application CD) into the CD drive.
• If you download the USB driver, skip this step and go to
the next step.
Connect the PC and the ID-RP4000V [SERVICE T]
e
connector with an A-B type USB cable (User sup-
plied).
Move the mouse pointer to the bottom left corner of
r
the desktop.
Move the mouse pointer
around here.
Right-click the Microsoft icon, and then click "Device
t
Manager."
Right-click
INSTALLING THE DRIVERS
®
8.1
Click
IMPORTANT!
A different USB driver from the ID-1 is used for the
ID-RP4000V.
Uninstall the USB driver for ID-1 first, then install the
USB driver for the ID-RP4000V, if the USB driver for
the ID-1 is installed in the PC.
NOTE:
The ID-RP4000V connection may not be recognized
by the PC if the USB cable is too long. Use as short
a USB cable as possible.
The "Device Manager" window appears, then make
y
sure a warning symbol " " is displayed, as shown
below.
NOTE: Although the warning symbol " " indicates that
the driver installation has failed, continue the proce-
dure.
6
4
Advertisement
Table of Contents
