Driver Installation; I Microsoft Windows Xp - Icom ID-RP1 Instruction Manual

The same USB driver, supplied with the ID-1 is usable
for the ID-RP1D/VS frequency programming software
I Microsoft
®
Windows
q Connect the ID-RP1D/VS [SERVICE] connector
and the PC USB port through an USB cable and
connector converter.
• Turn the power ON.
• "Found New Hardware USB < - > Serial" appears first,
then "Found New Hardware USB High Speed Serial Con-
verter" appears as below.
w The "Found New Hardware Wizard" will come up as
below. Insert the supplied CD into the CD drive, se-
lect "Install the software automatically (Recom-
mended)", then click [Next>].
Select
e The wizard starts searching for the driver and
shows the dialog below during search.
®
XP
Click

DRIVER INSTALLATION

The displayed dialog boxes or indications may dif-
fer slightly from the following instructions according
to your system conditions, or environment.
r While searching the driver, the "Hardware Installa-
tion" dialog box appears as below.
Click [Continue Anyway] to start the installation.
Click
t Windows starts installing the USB driver.
y After the installation is completed, click [Finish].
u After clicking [Finish], the dialog appears as below.
i Eject the CD.
• Rebooting the PC is recommended.
3
Click
9