Power Supply Atx Connector - Avnet MSC C10-MB-EV User Manual

MSC C10-MB-EV

4.19 Power Supply ATX Connector

An ATX connector with additional ATX12V connector is available to power the system.
Specification ATX connector:

References:

Connector:

Pin-out: Refer to ATX specification V2.2 [2]
Specification 2 pol. Power jack connector:

References:

Connector:

Pin-out: Refer to Table 25
Pin Signal name
1 +5-20 V
2 GND
Warning: The input power pins are connect to the power pins at the COM Express
connector. Check the power input range from your COM Express module if you use
other power supply than 12V.
X1503
Molex 39-29-9202
X3101
Kycon KLD(X)-0202-B (6.3mm, 2.5mm)
Function
VCC (inner pin 2.5mm diameter) 3.5 A
(Note: Rev.1 supports only 7.5V – 20V (LY10100102)
Ground (shell 6.3mm diameter)
Table 25 Pin-out Power IN Connector
43 / 48
GND pin2 --(●-- pin1 +5-20 V
User Manual