MSC C10-MB-EV
The supply voltage of the eDP logic and the eDP backlight can be adjusted with jumper JP1101 and
JP1102. The according position is printed on the PCB. Refer to chapter 4.7 LVDS-Interface.
2) Note: The power at 12V PCIe, VCC_LCD (X1601), VCC_BL_EDP (X1602), VCC_BL (X1101)
and 12V fan power are switched off, when the power input is not in the range of 11V to 13V. In
that case, you can feed 12V from an external power source at X1603 pin 4 to supply these
connectors with power.
Table 4 Pin-out embedded Display Port
22 / 48
User Manual