Start Mirror Function During Workout; End The Mirror Function - CARDIOSTRONG CCST-TX50-3 Assembly And Operating Instructions Manual

4 STORAGE AND TRANSPORT
4.1 General Instructions
⚠ WARNING
+ The storage location should be chosen so that improper use by third parties or children can
be prevented.
+ If your equipment does not have transportation wheels, the equipment must be
disassembled before transportation.
࣑ ATTENTION
+ Make sure that the equipment is protected from moisture, dust and dirt in the selected
storage location. The storage location should be dry and well ventilated and have a constant
ambient temperature between 10°C and 35°C.
4.2 Transportation Wheels
࣑ ATTENTION
If you want to transport your equipment over
particularly sensitive and soft floor coverings, such
as parquet, planks or laminate, lay out the transport
route with cardboard or similar to avoid possible floor
damage.
1. Stand behind the equipment and lift it until the weight
is transferred to the transportation wheels. After that,
you easily can move the equipment to a new position.
For long transport distances the equipment should
be disassembled and safely packed.
2. Select the new location by following the instructions
in the section 1.4 of this manual.
4.3 Folding Mechanism
⚠ WARNING
+ The treadmill is equipped with high-pressure shock absorbers that can cause the treadmill
to suddenly open if handled incorrectly. For more information, refer to the section 2.1 of this
manual.
+ Do not lift the treadmill by the running mat or the rear transporting wheels. These parts do
not lock and are difficult to grab.
NOTICE
L
The treadmill is foldable and thus saves space when it is stored. It also makes it easier to transport.
34
TX50