Table of Contents
Advertisement
Pronar T386
LABELLING
ON FIGURE 4.7
16
17
18
4.5.2 PULLING THE LOAD BOX ON THE TRAILER
WARNING
Before connecting load box one must take off the slow-moving vehicle plate.
If the trailer or the load box is tilted sideways or the load box is not positioned in the
trailer's axis of symmetry while pulling the load box on the trailer, stop pulling and take
the load box off the trailer.
Before starting loading or unloading the container, it is recommended to extend the
drawbar cylinders in order to initially tilt the frame back.
In order to pull the load box onto the trailer, carry out the following actions in the following
sequence.
Take off the slow-moving vehicle warning sign from the trailer.
If necessary, adjust position of hook by setting proper height – see chapter
4.2.
Switch on power supply of control panel by pressing push-button (1) - figure
(4.8).
SYMBOL
OF
FUNCTION
Indicator light signalling that the load box interlock is
locked.
Push-button for additional output (e.g. lowering the load
box gate).
Push-button for additional output (e.g. rising the load box
gate).
DESCRIPTION
4.20
SECTION 4
Advertisement
Table of Contents
