Tipping Frame - PRONAR T386 Operator's Manual

SECTION 3 Pronar T386

3.2.2 TIPPING FRAME

FIGURE 3.2 Tipping frame
(1) rear frame, (2) central frame, (3) hook frame, (4) tipping cylinder, (5) hook with latch, (6)
tipping frame interlock, (7) guide roller, (8) hydraulic interlock of load box
The complete tipping frame consists of three cooperating frames which are made of steel
closed profiles: rear frame (1), central frame (2) and telescopic hook frame (3) – figure (3.2).
The rear part of the complete tipping frame is connected with the trailer's lower frame by
means of pins which are pivot points when tipping the load box. The front part of the trailer's
3.5