Withdrawal From Use - PRONAR T386 Operator's Manual

SECTION 1
available means. Remaining oil should be collected using sorbents, or by mixing the oil with
sand, sawdust or other absorbent materials. The oil contaminations, once gathered up,
should be kept in a sealed, marked, hydrocarbon resistant container, and then passed on to
the appropriate oil waste recycling centre. The container should be kept away from heat
sources, flammable materials and food.
DANGER
Used hydraulic oil or gathered remains mixed with absorbent material should be stored in
a precisely marked container. Do not use food packaging for this purpose.
Used oil or oil unsuitable for further use due to loss of its properties should be stored in its
original packaging in the conditions described above. Waste oil should be taken to the
appropriate facility dealing with the re-use of this type of waste. Waste code: 13 01 10.
Detailed information concerning hydraulic oil may be found on the product's Material Safety
Data Sheet.
TIP
The hydraulic system of the trailer is filled with L-HL32 Lotos hydraulic oil.
WARNING
Waste oil should only be taken to the appropriate facility dealing with the re-use of this
type of waste. Do NOT throw or pour oil into sewerage or water tanks.

1.7 WITHDRAWAL FROM USE

In the event of decision by the user to withdraw the trailer from use, comply with the
regulations in force in the given country concerning withdrawal from use and recycling of
machines withdrawn from use. Before commencing dismantling, totally remove the oil from
the hydraulic system and reduce air pressure completely in the pneumatic brake system (e.g.
using air tank drain valve).
1.13
Pronar T386