Transporting The Machine - PRONAR T386 Operator's Manual

Pronar T386
• The arrangement of the load in load box may not cause an overload on the axle
and drawbar of the trailer.
• Loading and unloading work may be carried out only when the trailer is positioned
on level and hard surface. Tractor and trailer must be placed to drive forwards.
• When unloading the load box, do NOT operate the middle frame interlock lever if
the frame is raised.
• Ensure that there are no bystanders in the load box unloading or loading zone.
Before tipping the load box ensure proper visibility and make certain that there
are no bystanders near the machine.
• Do NOT move off or drive when load box is raised.
• Take particular care while working near electric power lines.
• When opening load box closure take particular care, because of the pressure of
the load on the wall.
• When closing load box wall take particular care to avoid crushing fingers.
• Do NOT tip the load box in windy conditions.
• If the load does not pour from the raised load box immediately cease unloading.
The trailer may only be tipped again after removing the problem (sticking,
wedging), which prevented the load from pouring.
• Do NOT jerk the trailer forwards if load is bulky or reluctant to pour and does not
unload.
• Do NOT raise the load box if there is any danger whatsoever that the trailer will tip
over.
• After completing unloading, ensure that the load box is empty.
• Do NOT move with raised load box.

2.1.6 TRANSPORTING THE MACHINE

• During travel on public roads comply with the road traffic regulations and transport
regulations in force in a given country, in which the trailer is used.
2.6
SECTION 2