Operation Of Folding Hydraulic Support (Option) - PRONAR T386 Operator's Manual

SECTION 4
Remove safety pin (5).
Raise support foot (3) and secure it in its position by inserting pin (5) into
proper hole.
Lowering the support
While holding support foot (3) with one hand, remove safety pin (5) and lower
the foot to a proper height.
Secure foot (3) in its position by inserting pin (5) into proper hole.
Set crank (4) in position (A) or (B).
Turn the crank in direction (D) to lower the support to the ground and adjust
drawbar height in relation to hitch (if the trailer is to be hitched to tractor)
WARNING
Before moving off, check that the support is maximally raised, and the crank is set in
neutral position (C).

4.3.2 OPERATION OF FOLDING HYDRAULIC SUPPORT (OPTION)

In order to operate the support, first connect hydraulic conduit terminated with a quick coupler
(6) to hydraulic system manifold in the tractor and then manually unfold cylinder (1) to vertical
position.
Unfolding the support
Unlock cotter pin (5) and remove securing pin (4) from hole (II).
Turn support foot (1) downwards –figure (4.5) item (A).
Insert pin (4) to hole (I) and secure it with cotter pin (5).
4.13
Pronar T386