Withdrawal From Use - PRONAR T679/4M User Manual

Chapter 1

1.8 WITHDRAWAL FROM USE

If the user decides to withdraw the ma-
chine from use, comply with the provisions
in force in the given country regarding
withdrawal from use and recycling of ma-
chines withdrawn from use.
Before dismantling the machine, the oil
must be completely removed from the hy-
draulic system.
In the event of parts being replaced, worn
or damaged parts should be sent to a recy-
cling centre. Used oil as well as rubber or
1.14 PRONAR T679/4M
DANGER
During dismantling, use appropriate tools and equip-
ment (overhead cranes, elevators, lifts, etc.) and use
personal protective equipment, i.e. protective cloth-
ing, footwear, gloves, glasses, etc.
Avoid oil contact with skin. Do not allow oil to leak.
plastic elements should be taken to plants
dealing with the utilization of this type of
waste.
General
E.3.1.526.07.1.EN