Table of Contents
Advertisement
Operation
OPERATING THE MACHINE WITH TEN-PROGRAM CONTROL SYSTEM
On: Turns the machine on:
•
The machine will start up in the most-recently used program.
•
The pump of a machine with a transparent cover will start when the cover is closed.
Off: Turns the machine off:
•
When pressing the
after about 4 seconds.
•
When pressing the
•
Closing the cover will initiate the cool-down phase.
•
The machine will complete a number of vacuum cycles before turning off automatically.
Stop-function:
•
Stops the machine at any point in the cycle and aerates the chamber.
Reset-function:
•
While programming, resets the program value to its original setting.
•
Press the menu button
Back function:
•
While reviewing programmed values, returns to the previous selection.
Stops the active function and initiates the next step in the cycle:
•
While the machine is running, exits the active function and jumps to the next step in the cycle.
•
While packing sauce or soup, the package may be sealed as soon as product boiling is
detected.
Menu Button:
•
Toggles between Home menu
•
Save Function: During programming, confirms and saves the entered program values and
returns to the Home menu.
•
Return Function: Returns to the Home menu.
Review program values:
•
•
Displays the programmed value for each function; the function being reviewed will be
blinking.
•
•
Returns to the Home menu.
Adjust program values and turn functions ON/OFF:
•
•
•
Turns functions ON/OFF; specific functions, like soft-air, clean cut seal, etc., are turned
either on or off.
•
If the function is turned on, the value may be adjusted by pressing the
•
Resets the original value.
•
Saves changes and returns to the Home menu.
button once, the
button a second time, the pump will stop immediately.
to return to the Home menu.
Cycles through programs P1 to P9, as well as PA and P H2O.
Displays the value for the next function.
Forward or back; adjusted values are saved right away.
Increases or decreases function values.
symbol will start blinking and the pump will stop
and Settings menu
10
.
and
buttons.
Advertisement
Table of Contents
Need help?
Do you have a question about the VP-NL-3016-SN and is the answer not in the manual?
Questions and answers