Installing The M.2 Ssd Module - Dell E02B005 Installation And Service Manual

Steps
1. Loosen the screws and lift the retention straps that secure the M.2 SSD module on the BOSS card.
2. Pull the M.2 SSD module away from the BOSS card.
Figure 36. Removing the M.2 SSD module
a. module connector (2)
b. screws (2)
c. module (2)
Next steps
Install the M.2 SSD module.

Installing the M.2 SSD module

Prerequisites
1. Follow the safety guidelines listed in
Steps
1. Align the M.2 SSD module connectors with the connectors on the BOSS card.
2. Push the M.2 SSD module until the module is seated firmly on the BOSS card.
3. Secure the M.2 SSD module on the BOSS card with the retention straps and screws.
74 Installing and removing system components
Safety instructions on page 45.