Table of Contents
Advertisement
Figure 18. Removing the drive from the drive carrier
Next steps
If applicable,
install a drive into the drive
carrier.
Installing a drive into drive carrier
Prerequisites
Follow the safety guidelines listed in
Safety instructions
on page 45.
Steps
1. Insert the drive into the drive carrier, with the connector end of the drive towards the back of the carrier.
2. Align the screw holes on the drive with the screw holes on the drive carrier.
3. Using the Phillips #1 screwdriver, replace the screws to secure the drive to the drive carrier.
56
Installing and removing system components
Advertisement
Table of Contents
