Table of Contents
Advertisement
Steps
Align the the release tabs on the air shroud with the slots on the system and lower the air shroud into the system until the tabs click in
place.
Figure 13. Installing the air shroud
Next steps
1. Follow the procedure listed in
Drives
NOTE:
Mixing of PCIe SSD, SAS, or SATA drives is not supported.
Removing a drive blank
Prerequisites
CAUTION:
To maintain proper system cooling, all empty drive slots must have drive blanks installed.
Follow the safety guidelines listed in
Steps
Press the release button and slide the drive blank out of the drive slot.
52
Installing and removing system components
After working inside your system
Safety instructions
on page 45.
on page 46.
Advertisement
Table of Contents
