Specifications; Electrical Specifications; General Specifications - ADInstruments AD210 User Manual

_______________________________________________________________________________

Specifications

Electrical Specifications

(23 ±5 , Four-wire Measurement)
DC Voltage Measurement
Range (60V / 6A)
0 ~ 6 V
6 ~ 10 V
10 ~ 60 V
Vopen: open circuit voltage of solar cell or module.
If users use alligator clips to measure voltage only, they must make V+ clip
connect with I+ clip; V- clip connect with I- clip. Thus, 4-wire measurement
is converted to 2-wire measurement.
DC Current Measurement
Range (60V / 6A)
0.01 ~ 0.6 A
0.6 ~ 1 A
1 ~ 6 A
Ishort: short circuit current of solar cell or module.
Internal Resistance at Ishort: 0.05 Ohm.
Ishort is measured with internal resistance, circuit resistance, and test lead
resistance.
DC Current Simulation
Range (60V / 6A)
0.01 ~ 1 A
1 ~ 6 A
*
If Current is greater than 6A, test (Auto-Scan, Scan, or Test) can not be
Performed.
*
Maximum duration of simulation is 9.999 seconds if power is less than
100 W.
*
Duration of simulation is 10m seconds if power is greater than 100 W.
Chapter 5

General Specifications

©Copyright Abacanto Digital SA.
Resolution
0.001 V
0.001 V
0.01 V
Resolution
0.1 mA
0.1 mA
1 mA
*
Resolution
0.1 mA
1 mA
Battery Type: Rechargeable, 2500mAh (1.2V) x 8
AC Adaptor: AC 110V or 220V input
Manual de usuario AD210
Accuracy
± 1 % ± (1 % of Vopen ± 9 mV)
± 1 % ± (1 % of Vopen ± 0.09 V)
± 1 % ± (1 % of Vopen ± 0.09 V)
Accuracy
± 1 % ± (1 % of Ishort ± 0.9 mA)
± 1 % ± (1 % of Ishort ± 9 mA)
± 1 % ± (1 % of Ishort ± 9 mA)
Accuracy
± 1 % ± 0.9 mA
± 1 % ± 9 mA
AD Instruments
22