General Inspection; To Prepare For Use - ADInstruments DSA2016TG User Manual

1.2 General Inspection

1. Inspect the shipping container for damage
Keep the damaged shipping container or cushioning material until the contents of the shipment
have been checked for completeness and the instrument has passed both electrical and
mechanical tests.
2. Inspect the instrument
In case of any damage, or defect, or failure, notify the AD INSTRUMENTS representative.
3. Check the accessories
Please check the accessories according to the packing lists. If the accessories are incomplete or
damaged, please contact the AD INSTRUMENTS representative.

1.3 To Prepare for Use

This chapter introduces the basic process to help you fast start to use the instrument.
Prepare the instrument.
1. To Connect to Power
Please use the power cord provided with the accessories to connect the spectrum analyzer to AC
power source.
Press the power switch on lower left of front pannel to turn on the instrument.
2. Power-on Inspection
After connecting the instrument to power source correctly, press at the front panel to start the
spectrum analyzer. Following the start-up screen which shows the start-up initialization process
information, the sweep curve is displayed.