Trace Subsystem; Read Appointed Trace Data; Select Trace Display Mode; Set Trace Average Time - ADInstruments DSA2016TG User Manual

Check scale type
Parameter specification
LOG：Log
LIN: Line
Return format
Return LIN or LOG

5.6 TRACe Subsystem

5.6.1 Read appointed trace data

Command format:
TRACe[:DATA]:TRACE<n>?
Function description:
Read out appointed trace data from spectrum analyzer
Parameter specification
Value of n : 1|2|3|4
Return format
Return appointed trace data, its format depends on the set of commands:
FORMat:TRACe:DATA

5.6.2 Select trace display mode

Command format:
TRACE<n>:MODE WRITe|MAXHold|MINHold|FREEze|BLANk
TRACE<n>:MODE?
Function description:
Set appointed trace mode
Check appointed trace mode
Parameter specification
Value of n : 1|2|3|4
WRITe：Clear write
MAXHold: Maximum hold
MINHold：Minimum hold
FREEze：Review
BLANk：Close
Return format
Return WRITe, MAXHold, MINHold, FREEze, BLANk

5.6.3 Set trace average time

Command format:
TRACE<n>: AVERage:COUNt <int_avg>
TRACE<n>: AVERage:COUNt?