Reset; Abort Command; Calculate Subsystem; Calculate: Marker Subsection - ADInstruments DSA2016TG User Manual

5.2.3 Reset

Command format:
*RST
Function description:
This command returns the instrument to a factory defined condition that is appropriate for
remote programming operation.

5.2.4 ABORt Command

Command format:
:ABORt
Function description:
Give up the current operation. Restart the sweep.

5.3 CALCulate Subsystem

5.3.1 CALCulate: MARKer Subsection

• Markers All Off on All Traces
Command format:
:CALCulate:MARKer:AOFF
Function description:
This command turns off all markers on all traces.
• Turn on or off COUNT
Command format:
CALCulate:MARKer:FCOunt[:STATe] OFF|ON|0|1
Function description:
Turn on or off the COUNT function
• Query frequency values of COUNT
Command format:
CALCulate:MARKer:FCOunt:X?
Function description:
Query frequency values of COUNT, unit is Hz.
• Set mark as current mark
Command format:
CALCulate:MARKer:CURrent 0|1|2|3
Function description:
Set mark as current mark, easy for control.
• Set measurement type of current mark
Command format:
CALCulate:MARKer:MODE OFF|POSition|DELTa|BAND|SPAN
CALCulate:MARKer:MODE?