Table of Contents
Advertisement
2.2 Top Panel
1. RF OUT Connector: The output for the built-in tracking generator. Enabled with Option TG3.
2. EXT TRIG IN/REF IN (BNC, Female): Connects to an external TTL signal or a 10 MHz
reference signal. The TTL signal is used to the analyzer's internal sweep.
3. RF IN Connector (50 Ω): Accepts an external input with a frequency range from 100 kHz to 3
GHz(1.6GHz), tunable to 9 kHz.
2.3 Side Panel
2.3.1 Right Panel
1.
USB interface (Device)
Connects to a PC
2.
WAN Interface
Connects to a PC for SCPI remote control
3.
USB interface (Host)
Connects to a USB memory stick or disk
4.
External DC power connector
Provides input for the DC power source via an AC-DC adapter, or Automotive type DC
adapter
1
2
3
4
Right Panel
Advertisement
Table of Contents
