Table of Contents
Advertisement
Function description:
This command indicates detection mode. The detector will show every sampling
everage in the intervel between each trce. The everage will be achieved through the
following two methods.
Power Methods (RMS)
Video Methods (Y-axis unit)
These two methods is controlled by trace detection.
Parameter specification
The value of n: 1|2|3|4
NORMal: normal
POSitive：positive value
NEGative：negative value
SAMPle：sampling
AVERage：average
Return format
Quary and return NORMal, POSitive, NEGative, SAMPle or AVERage.
5.7.5 Bandwidth
•
Set resolution bandwidth RBW
Command format:
SENSe:BANDwidth:RESolution <freq>
SENSe:BANDwidth:RESolution?
Function description:
Set resolution bandwidth (RBW)
Query resolution bandwidth.
Parameter specification
freq, integral data, range from 10Hz to 1MHz.
Return format
Query and return the value of RBW as integral data format, unit is Hz.
•
Set resolution bandwidth RBW as AUTO mode
Command format:
SENSe:BANDwidth:RESolution:AUTO OFF|ON|0|1
SENSe:BANDwidth:RESolution:AUTO?
Function description:
Set resolution bandwidth RBW as AUTO mode.
Query the status of resolution bandwidth AUTO mode.
Return format
Query and return the ON(1) or OFF(0) status of resolution bandwidth AUTO mode.
•
Set video bandwidth VBW
Command format:
SENSe:BANDwidth: VIDeo <freq>
SENSe:BANDwidth: VIDeo?
Function description:
Set video bandwidth (VBW).
Advertisement
Table of Contents
