Table of Contents
Advertisement
2.4 User Interface
User interface:
1. Reserved
2. Time: System time
3. USB storage device status:
4. Operation status: Display "Local" (in local mode) or "Rmt" (in remote mode).
5. Power display
6. Reference level：Reference level value
7. Attenuator settings: Attenuator settings
8. SWT Value
9. Marker value：
Cursor X: Current X value of the cursor. Note that X indicates different physical quantities
in different functions.
Cursor Y: Current Y value of the cursor. Note that Y indicates different physical quantities
in different functions.
10. Trace 1 Detector type: Normal, Pos peak, Neg peak, Sample, RMS Avg.
11. Trace 2 Detector type: Normal, Pos peak, Neg peak, Sample, RMS Avg.
12. Trace 3 Detector type: Normal, Pos peak, Neg peak, Sample, RMS Avg.
13. Trace 4 Detector type: Normal, Pos peak, Neg peak, Sample, RMS Avg.
14. Sweep mode: Continuous or Single sweep (with current number of sweeps)
is displayed when USB storage device is installed.
Advertisement
Table of Contents
