Set On/Off Of The Average Function In Appointed Trace; Clear All Trace; Format Subsystem - ADInstruments DSA2016TG User Manual

Function description:
Set appointed trace average time
Check appointed trace average time
Parameter specification
Value of n : 1|2|3|4
int_avg, integral data,range from 1 to 1000
Return format
Return appointed trace average time

5.6.4 Set on/off of the average function in appointed trace.

Command format:
TRACE<n>:AVERage 0|1
TRACE<n>:AVERage?
Function description:
Turn on or off the average function of appointed trace.
Check the on/off status of average function in appointed trace.
Parameter specification
Value of n: 1|2|3|4
Return format
Check and return the on(1)/off(0) status of average function in appointed trace

5.6.5 Clear all trace

Command format:
TRACe:CLEar:ALL
Function description:
Clear all trace, means to set all trace type as BLANK.

5.6.6 FORMat Subsystem

Set the return format of trace data.
Command format:
FORMat:TRACe:DATA ASCii|REAL
FORMat:TRACe:DATA?
Function description:
Set the return format of trace data.
Parameter specification
ASCii: The data point is ASCII character, separated by comma.
REAL: The data point is 32 bit binary number.
Return format
Check and return ASCii or REAL