Table of Contents
Advertisement
Parameter
Default
Range
Unit
Knob Step
Direction Key Step
2)
Peak thresh
Specify the minimum value of peak amplitude. The peak which is higher than peak thresh can be
judged as peak.
Parameter
Default
Range
Unit
Knob Step
Direction Key Step
3)
Peak Search
Set the peak which is looked up in peak search is whether the maximum value on the trace or the
peak meets search parameter.
•
Choose "Max Value", then look up the maximum value on the trace.
•
Choose "Parameter", then look up the peak meets the condition of search parameter on the
trace.
•
This set is only valid for the peak search excecuted when press "Peak".
3.4 Shortcut Key
3.4.1 Auto
Search for signals automatically throughout the full frequency range and adjust the frequency and
amplitude for optimum display effect of the signal, thus realizing one-key signal search and auto
setting of parameters.
Before Auto Search:
Instruction
10 dB
0 dB ~ 200 dB
dB
1 dB
1 dB
Instruction
-90 dB
-200 dBm ~ 0 dBm
dBm,-dBm,mV,uV
1 dBm
1 dBm
Advertisement
Table of Contents
