Step 3 - Setting Up The Nursery Unit; Step 4 - Turning On Your Monitor - Angelcare AC215 Owner's Manual

STEP 3 - SETTING UP THE CAMERA
2
3.1 - CAMERA
Front Side
TURNING ON YOUR MONITOR
1
2
When Parent Unit is turned
ON and Camera is OFF,
Parent Unit will display
Disconnected mode.
1) Place the Camera at a
minimum of 1 meter /
3
3 feet away from the crib.
2) Connect the USB plug to
the Camera.
3) Connect the USB plug with
the power adapter and then
with an electrical outlet.
4) Adjust the camera using
the magnetic mount to get
the best view of baby in
the crib.
A
B
C
A) POWER ON/OFF
D
B) Pause Sensor Pad
C) Speaker
E
D) Microphone
E) Camera
F
F) Room temperature display
G) Micro USB charging port
G
1) Press and hold the Parent Unit
ON/OFF button for 2 seconds until
LCD screen is turned ON. Angelcare's
logo will be shown for 1 second.
2) Slide the Camera ON/OFF switch to
the ON position
3) The Parent Unit will display Video
mode screen.
If there is a lost connection between the
2 units after 15 seconds, the Out-of-Range
alarm will sound on the Parent Unit (refer to
troubleshooting):
• The Out-of-Range icon will appear on the
screen.
• The Lost Connection icon will appear on the
info bar.
E
N
9