Table of Contents
Advertisement
STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS
IMPORTANT
When in the menu or sub-menu modes, sound transmission between Parent and Nursery Units will
be temporarily deactivated. ONLY the movement detection alarm will remain active (if function is
activated).
6.1 - SOUND TRANSMISSION (VOX)
Your monitor is 'Sound Activated'. This means that it will transmit sounds only when it detects them.
It will detect even the softest levels of crying.
To save power, after 10 seconds, the sound transmission will stop if no sound is detected.
Once sound is detected transmission will automatically activate.
TO ADJUST THE SOUND SENSITIVITY (VOX):
Allows you to determine the sound level needed to trigger sound transmission
to the Parent Unit. This means that sound will only transmit based on the level that you set.
1
2
3
4
ON
20 sec
6.2 - HOLD
Allows you to put your monitor on hold.
1
2
2
4
3
IMPORTANT
When your monitor is on Hold, the movement-
detection feature and movement alarm are disabled.
1) Press Menu/Select button to access
the main menu.
2) Select the Settings icon to access
sub-menu.
3) Select the VOX Sensitivity icon.
4) Use the up and down arrows to choose
the desired sensitivity level (1 to 4)
5
5) Press Menu/Select button to confirm.
1) Press Menu/Select button to access
main menu.
2) Select the Hold icon.
OR
Press and hold the Nursery Unit Pager/
Hold button for at least 2 seconds.
3) Hold icon will appear on the screen.
4) Press and hold the Nursery Unit Pager/
Hold again to return to deactivate Hold.
Nursery Unit Night Light will blink.
Parent Unit will emit 3 consecutive
beeps every 30 seconds to remind
you that monitor is on Hold.
E
N
13
Advertisement
Table of Contents
