What's In The Box; Turning On Your Monitor; Setting Up The Nursery Unit - Angelcare AC25 User Manual

WHATS IN THE BOX
1. X 1 Nursery Unit
2. X 2 AC Adaptors
3. X 1 Parent Unit (with Li-ion, 3.7V 3000mAh Battery inserted ready for use, please note
you will need to charge the unit for at least 8 hours prior to first use)
4. X 1 Movement Sensor Pad (with CR2450 3V battery inserted ready for use, please note
you will need to remove the plastic tab prior to use)
5. Hardware (for wall mounting)
What you need
• Hardboard if the cot does not have a firm surface underneath the matteress.
• Drill and Screwdriver for the wall mounting (if required)

TURNING ON YOUR MONITOR

1. The Nursery Unit & Parent Unit come pre paried.
2. To turn on your Parent Unit press the middle button for 5 seconds.
3. To turn on your Nursery Unit press the middle button for 5 seconds.

SETTING UP THE NURSERY UNIT

Movement
Pad
2 | USER MANUAL
AC25_BabyMovementMonitor_Manual_Final.indd 2 AC25_BabyMovementMonitor_Manual_Final.indd 2
Place the Nursery
Unit and Adaptor
cord at least
1 metre
from the cot.
Wall-Mounted
1
(The mounting
height of the
Nursery Unit
should be less
than 2 metres.)
Tabletop
2
2023-07-12 13:47 2023-07-12 13:47